Enerpac
EVO1240460
Synchronous Lifting System
- Lift points
- 12
- Motor
- 10 hp
- Supply
- 460 V
Rentals · Hamilton, Ontario · Since 1956
Enerpac and hydraulic
Enerpac and hydraulic
equipment rentals
One of Canada's deepest hydraulic rental fleets, run out of Niagara Street since 1956. Cylinders to 575 tons, hydraulic torque wrenches, pumps and 12-point synchronous lifting, calibrated on our own bench before it leaves the building.
-
Authorized Enerpac centre
Service and warranty work is done here, so the fleet is maintained by the same technicians who repair the brand.
-
Calibrated before it ships
Torque tooling is calibrated on our own bench before it goes out. No guessing what the last job did to it.
-
No fixed minimum term
A single shift, a shutdown, or months on a project. The fleet is sized for turnarounds, so short notice is normal.
-
Delivery we can work with
Tell us where the job is and when you need it. We will accommodate what we can, so reach out and we will work it out with you.
The fleet
Everything below is ours.
Synchronous Lifting Systems
Multi-point computer-controlled lifting that holds every jacking point level to the millimetre. The heavy end of what we rent, and the reason a lot of first calls come in.
Hydraulic Torque Wrenches
Square-drive and low-clearance hydraulic wrenches for controlled bolting, matched to the right pump and calibrated on our own bench.
Enerpac
RSQ11000ST
Square Drive Hydraulic Torque Wrench
- Drive
- 1 1/2" square
Enerpac
S11000X
Square Drive Hydraulic Torque Wrench
- Drive
- 1 1/2" square
Enerpac
S1500X
Square Drive Hydraulic Torque Wrench
- Drive
- 3/4" square
Enerpac
S25000X
Square Drive Hydraulic Torque Wrench
- Drive
- 2 1/2" square
Enerpac
S3000X
Square Drive Hydraulic Torque Wrench
- Max torque
- 3225 ft-lb
- Drive
- 1" square
Enerpac
S6000X
Square Drive Hydraulic Torque Wrench
- Drive
- 1 1/2" square
TorcUp
TX-4
Hexagon Hydraulic Torque Wrench
- Hex size
- 80 mm
HYTORC
HY3MXT
Hydraulic Torque Wrench
Pneumatic, Battery and Hand Torque Wrenches
Air and cordless bolting tools for work away from a hydraulic power unit, plus hand torque wrenches for lighter and final-check work.
RAD
B-RAD1000-2
Battery Torque Wrench
RAD
B-RAD1500-2
Battery Torque Wrench
RAD
B-RAD3000-2
Battery Torque Wrench
Precision Instruments
C4D600F
Dial Torque Wrench
- Max torque
- 600 ft-lb
RAD
RAD-1800NGX-R
Pneumatic Torque Wrench
RAD
RAD-3400GX
Pneumatic Torque Wrench
RAD
RAD600
Pneumatic Torque Wrench
LC8PT
Torque Wrench
LT140
Torque Wrench
Cassettes, Links and Reducers
Hexagon cassettes, drive reducers and extension arms that take a wrench across nut sizes without buying another tool.
Enerpac
W2110X
Hexagon Cassette
- Hex size
- 2"
Enerpac
W4205X
Hexagon Cassette
- Hex size
- 2 5/16"
Enerpac
W4206X
Hexagon Cassette
- Hex size
- 2 3/8" / 60 mm
Enerpac
W4207X
Hexagon Cassette
- Hex size
- 2 7/16"
Enerpac
W4210X
Hexagon Cassette
- Hex size
- 2 5/8"
Enerpac
W4213X
Hexagon Cassette
- Hex size
- 2 13/16"
Enerpac
W8302X
Hexagon Cassette
- Hex size
- 3 1/8" / 80 mm
Enerpac
W8314X
Hexagon Cassette
- Hex size
- 3 7/8"
15007
Adapter
- Fits
- 1" male to 1 1/2" female
Momento
IPA29
Adapter
- Fits
- 1" male to 3/4" female
Momento
IPA56
Adapter
- Fits
- 2 1/2" male to 1 1/2" female
Momento
IPA95
Adapter
- Fits
- 1 1/2" male to 1" female
S-1" X 1" X 2"
Adapter
S-2 1/2" X 2 1/2 X 6"
Adapter
Cassette Reducer Inserts
17 sizes in the fleet
IM205
Drive Extension
RAD
B-RAD1500
Extension Arm
RAD
B-RAD3000
Extension Arm
RAD
RAD1800-EXT
Extension Arm
LC8PT-L3
Hex Link
LC8PT-L5
Hex Link
Hollow Plunger Cylinders
Hollow-bore rams for tensioning, pulling and any job that has to pass a stud, bolt or cable straight through the cylinder.
Enerpac
RRH1006
Hollow Plunger Cylinder
- Capacity
- 100 ton
- Stroke
- 6 in
- Action
- Double-acting
Enerpac
RCH603
Hollow Plunger Cylinder
- Capacity
- 63.6 ton
- Stroke
- 3.00 in
Enerpac
RCH306
Hollow Plunger Cylinder
- Capacity
- 36.1 ton
- Stroke
- 6.13 in
Enerpac
RCH202
Hollow Plunger Cylinder
- Capacity
- 23.6 ton
- Stroke
- 2.00 in
Enerpac
RCH121
Hollow Plunger Cylinder
- Capacity
- 13.8 ton
- Stroke
- 1.63 in
Low-Height and Flat Cylinders
Pancake, low-profile and ultra-flat rams for lifting where there is barely room to get anything underneath the load.
Enerpac
CUSP200
Ultra-Flat Cylinder
- Capacity
- 235 ton
- Stroke
- 0.59 in
Enerpac
RSM1500
Flat-Jac Flat Cylinder
- Capacity
- 153.4 ton
- Stroke
- 0.63 in
Enerpac
RLL1002
Low-Profile Pancake Cylinder
- Capacity
- 104 ton
- Stroke
- 1.77 in
Enerpac
RSM1000
Flat-Jac Flat Cylinder
- Capacity
- 98.1 ton
- Stroke
- 0.63 in
Enerpac
RCS1002
Low-Height Cylinder
- Capacity
- 98.1 ton
- Stroke
- 2.25 in
Enerpac
RSM500
Flat-Jac Flat Cylinder
- Capacity
- 48.1 ton
- Stroke
- 0.63 in
Enerpac
RCS502
Low-Height Cylinder
- Capacity
- 48.1 ton
- Stroke
- 2.38 in
Enerpac
RSM300
Flat-Jac Flat Cylinder
- Capacity
- 32.4 ton
- Stroke
- 0.50 in
Enerpac
RCS302
Low-Height Cylinder
- Capacity
- 32.4 ton
- Stroke
- 2.44 in
Enerpac
RCS201
Low-Height Cylinder
- Capacity
- 22.1 ton
- Stroke
- 1.75 in
Enerpac
RSM100
Flat-Jac Flat Cylinder
- Capacity
- 11.2 ton
- Stroke
- 0.44 in
Enerpac
RCS101
Low-Height Cylinder
- Capacity
- 11.2 ton
- Stroke
- 1.50 in
Lock Nut and High-Tonnage Cylinders
Load-holding cylinders with mechanical lock nuts, from 100 tons to 575 tons, for sustained lifts and structural work.
Enerpac
LPL5002
Lock Nut Cylinder
- Capacity
- 575 ton
- Stroke
- 1.77 in
Enerpac
LPL2502
Lock Nut Cylinder
- Capacity
- 286 ton
- Stroke
- 1.77 in
Enerpac
CLL2502
Collar Lock Cylinder
- Capacity
- 250 ton
Enerpac
LPL2002
Lock Nut Cylinder
- Capacity
- 223 ton
- Stroke
- 1.77 in
Enerpac
LPL1602
Lock Nut Cylinder
- Capacity
- 179 ton
- Stroke
- 1.77 in
Enerpac
RCL1002
Lock Nut Cylinder
- Capacity
- 104 ton
- Stroke
- 1.97 in
- Action
- Single-acting
Enerpac
LPL602
Hydraulic Cylinder
Simplex
RLN2002
Lock Nut Cylinder
- Capacity
- 200 ton
- Stroke
- 2 in
Simplex
RLN1002
Lock Nut Cylinder
- Capacity
- 100 ton
- Stroke
- 2 in
Simplex
RLS302
Rental Equipment
- Capacity
- 30 ton
General Purpose Cylinders
Single and double-acting rams across the working range, in steel and aluminium, with collar threads for fixturing.
Enerpac
RC504
Single-Acting Cylinder
- Capacity
- 55.2 ton
- Stroke
- 4.00 in
Enerpac
RC506
Single-Acting Cylinder
- Capacity
- 55.2 ton
- Stroke
- 6.25 in
Enerpac
RAR5010
Aluminium Cylinder
- Capacity
- 50 ton
- Stroke
- 9.84 in
Enerpac
RAC306
Aluminium Cylinder
- Capacity
- 34.2 ton
- Stroke
- 5.91 in
Enerpac
RC308
Single-Acting Cylinder
- Capacity
- 32.4 ton
- Stroke
- 8.25 in
Enerpac
RC256
Single-Acting Cylinder
- Capacity
- 25.8 ton
- Stroke
- 6.25 in
Enerpac
RC1010
Single-Acting Cylinder
- Capacity
- 11.2 ton
- Stroke
- 10.13 in
Enerpac
RC102
Single-Acting Cylinder
- Capacity
- 11.2 ton
- Stroke
- 2.13 in
Enerpac
RC106
Single-Acting Cylinder
- Capacity
- 11.2 ton
- Stroke
- 6.13 in
Enerpac
RC108
Single-Acting Cylinder
- Capacity
- 11.2 ton
- Stroke
- 8.00 in
Enerpac
RC50
Single-Acting Cylinder
- Capacity
- 4.9 ton
- Stroke
- 0.63 in
Enerpac
RC59
Single-Acting Cylinder
- Capacity
- 4.9 ton
- Stroke
- 9.13 in
Simplex
R556
Hydraulic Cylinder
- Capacity
- 55 ton
- Stroke
- 6.19 in
- Action
- Single-acting
Electric Hydraulic Pumps
Induction and universal-motor power units, including torque-wrench pumps with pendant control and LCD pressure readout.
Enerpac
PUD1100E
Electric Hydraulic Pump
- Speed
- Two speed
Enerpac
PUJ1200B
Electric Hydraulic Pump
- Speed
- Two speed
Enerpac
PUJ1201B
Electric Hydraulic Pump
- Speed
- Two speed
Enerpac
ZE3008NB
Electric Hydraulic Pump
- Supply
- 115 V
Enerpac
ZE3320MB
Electric Hydraulic Pump
Enerpac
ZE4340LBR
Electric Hydraulic Pump
Enerpac
ZU4320JB
Electric Hydraulic Pump
Enerpac
ZU4420JB
Electric Hydraulic Pump
Enerpac
PMU10427Q
Torque Wrench Pump
- Speed
- Two speed
Enerpac
ZU4204BB-QH
Torque Wrench Pump
Enerpac
ZU4208
Torque Wrench Pump
Enerpac
ZU4208BB-QHR
Torque Wrench Pump
Simplex
G1131
Electric Hydraulic Pump
Power Team
PE554
Electric Hydraulic Pump
ATW Tools
ATW LP3-2
Torque Wrench Pump
Simplex
G1171T
Torque Wrench Pump
Simplex
G3172T
Torque Wrench Pump
Air Hydraulic Pumps
Air-over-hydraulic pumps for plants where an electric power unit is not wanted, not practical or not permitted.
Enerpac
PATG1102N
Air Hydraulic Pump
Simplex
GA90
Air Foot Pump
Hand Pumps
Single and two-speed hand pumps. The dependable way to run a cylinder where there is no power at all.
Enerpac
P142
Hydraulic Hand Pump
- Speed
- Two speed
Enerpac
P39
Hydraulic Hand Pump
- Speed
- Single speed
Enerpac
P392
Hydraulic Hand Pump
- Speed
- Two speed
Enerpac
P462
Hydraulic Hand Pump
Enerpac
P80
Hydraulic Hand Pump
- Speed
- Two speed
Enerpac
ATP1500
Ultra High-Pressure Pump
SKF
High-Pressure Pump
Tentec
High-Pressure Pump
Torque Multipliers
Manual multipliers and reaction bars for high torque without a hydraulic power source.
Enerpac
E392
Torque Multiplier
- Max torque
- 2200 ft-lb
- Drive
- 1" square
Enerpac
E393
Torque Multiplier
- Max torque
- 3200 ft-lb
- Drive
- 1" square
Proto
6018
Torque Multiplier
Proto
J6202
Torque Multiplier
Bessey
JM-1000
Torque Multiplier
Impact Sockets and Hammer Wrenches
Deep and standard impact sockets from 3/4 inch through 3-1/2 inch drive, plus struck hammer wrenches in imperial and metric.
1" Drive Impact Sockets
66 sizes in the fleet
1-1/2" Drive Impact Sockets
45 sizes in the fleet
1/2" Drive Wrenches
3 sizes in the fleet
2-1/2" Drive Impact Sockets
24 sizes in the fleet
3-1/2" Drive Impact Sockets
12 sizes in the fleet
3/4" Drive Impact Sockets and Wrenches
3 sizes in the fleet
Hammer Wrenches, Imperial and Metric
21 sizes in the fleet
Gray
7-632
Impact Socket
Momento
PA65
Impact Socket
Valves, Manifolds, Gauges and Hose
The parts that turn a pump and a cylinder into a working system: split-flow manifolds, needle and check valves, gauges and high-pressure hose.
Enerpac
A205
C-Clamp
Enerpac
V66F
Check Valve
Enerpac
G2535L
Gauge
Enerpac
GA3
Gauge
Enerpac
A64
Hydraulic Manifold
- Ports
- 7
Enerpac
A66
Hydraulic Manifold
- Ports
- 6
Enerpac
V66
Needle Valve
Enerpac
V82
Needle Valve
Enerpac
AM41
Split-Flow Manifold
Vulkan
CD5
Chock
Vulkan
CD6
Chock
Vulkan
CD8
Chock
Larzep
23117
Control Valve
Mitutoyo
2416A
Gauge
High-Pressure Hose
HT1510HR
High-Pressure Hose
Power Team
9642
Hydraulic Manifold
Larzep
AZ5124
Hydraulic Manifold
Magnetic Base Stand
TWH-20
Torque Wrench Hose Set
Measurement and Bolt-Load Instruments
Ultrasonic bolt gauges and precision indicators for verifying what the tooling actually achieved on the joint.
Raymond Engineering
PDX135
Ultrasonic Bolt Gauge
Nothing in the fleet matches that. Try a shorter search, or call the shop and describe the job.
Questions we get asked
Rental questions, answered plainly.
What is the minimum rental period?
There is no fixed minimum. The fleet goes out for a single shift, a shutdown, or months at a time on a long project. Tell us the window and we will work to it.
Do you deliver hydraulic rentals outside Hamilton?
Tell us where the job is and when you need it, and we will accommodate what we can. Reach out with the location and the dates and we will work it out with you. Toll-free (888) 368-7772.
Is rented torque equipment calibrated?
Yes. Hydraulic torque wrenches and pumps are calibrated in our own shop before they go out. We are an authorized Enerpac service and warranty centre, so the same bench that services the fleet services customer tools.
Can you supply an operator or technician with the equipment?
Yes. We can help you make complex jobs a bit easier. Ask when you request the quote and we will talk through what support the job needs.
I cannot find what I am looking for in the fleet.
We are always updating the inventory. If you cannot see what you need on this page, reach out and tell us what the job calls for.
What size hydraulic cylinders can you rent?
The fleet runs from small 4.9 ton rams up to 575 ton lock nut cylinders, in general purpose, hollow plunger, low-height, flat and lock nut styles.
Do you rent hydraulic torque wrenches and the pumps to run them?
Yes, and we match them. Square drive wrenches from 3/4 inch to 2-1/2 inch drive, hexagon cassettes, and the electric, air or hand pumps to drive them, supplied as a working set with hoses.
Quote · Tell us where the job is
Tell us the application, tonnage, stroke and timeline.
We confirm availability against the active fleet and route the unit to the job site.
Toll-free (888) 368-7772.